13" Bench Top Planer Steel City 40-305

Steel City offers this 13"- 2 speed portable planer equipped with an exclusive “Supercut” cutting cylinder which greatly allows easy handling of hardwoods. Considered as an intermediate portable planer, it is easy to set up, adjust and operate. Its main advantage lies in the fact that if one of its dual-sided HSS inserts gets damaged or worn, one only has to rotate or replace it.

• Powerful 15Amp – 10000 RPM – 110V motor with circuit breaker protection and integrated paddle On-Off main switch with removable key at the front
• 2"dia indexed insert cylinder with lock latch equipped with 6 lines of reversible dual-sided HSS inserts (26 in total)
• The set is mounted on 4 screw posts
• Maximum opening capacity: 13"(330mm) width x 6"(150mm) height
• Minimum length capacity: 7"(180mm)
• Average cutting capacity: 1/8"(3.2mm) when width is less than 6"(150mm) or 1/16"(1.6mm) when width is more than 6"(150mm)
• 2 feed rate speeds: 18 et 26 Ft/min (5.5/8m)
• One 13"(330mm) x 9"(225mm) steel table with 2 steel extension tables of same size
• 4"dia (100mm) central port for dust collector
• Spring load depth of cut gauge positioned at front to visualize the desired depth of cut
• 6 position workpiece thickness turret located on right side to pre-set the desired finished workpiece thickness: (1/8”(3.2mm), ¼”(6.4mm), ½”(12.8mm), ¾”(19.2mm),1”(25.4mm), 1-1/4”(31.8mm)
• Dimensions are 22"(55cm) x 16"(40cm) x 20"(50cm) and weight is 66 Lbs (30Kg)

For those who may require a little bit more!